Tel: 01386 861600
Fax: 01386 861602
sales@lowdenlimited.co.uk
Bismuth Tin Lead Indium Cadmium Antimony Zinc
Nickel Copper Aluminium Molybdenum Tungsten Rehnium Tantalum

 

Carbon Fibre Reinforced Carbon Composites

 

Carbon fibre-reinforced carbon or graphite is a high strength composite material consisting of a carbon matrix and reinforcing carbon fibres.

 

Typical physical properties of CFRC

Bulk density g/cm³ 1.4 - 1.45
Bending strength N/mm² 210 - 250
Dynamic E modulus kN/mm² 60 - 65
Tensile strength N/mm² 260 - 330
Electrical resistance at 20ºC, parallel to the direction of the fibre ohms 25 - 30
Interiaminar shear strength N/mm² 9 - 12
Ash content % 0.08



 

Carbon fibre fabric and carbon rovings are impregnated with pitch or resins and are then laminated into sheets or wound into cylinders. Custom shapes can also be fabricated. These are then cured and carbonized. CFRC materials for high temperature applications are usually processed at a temperature of 2000ºC before machining and graphitized at approximately 2900ºC. The physical properties of CFRC can be varied as required by the choice of type, content and orientation of the fibres, the lamination process, the secondary compression, and the baking and graphitizing temperatures.

This carbon composite, together with the light, high strength and rigid carbon fibres has all the virtues of graphite but is much less dense and has considerably higher strength and rigidity.

 

Characteristics properties of CFRC

High strength parallel to the direction of the fibre laminates
Low thermal conductivity perpendicular to the direction of the fibre laminates
Low bulk density
Corrosion resistant
High resistance to thermal shock
High chemical purity
Thermally stable at temperatures in excess of 2000ºC
Pseudoplastic fracture behaviour, high laminar shear
Low thermal expansion
High bending fatigue strength
Electrically conductive
practically no creep behaviour up to 2000ºC
Anisotropic

CRFC CRFC

Support For Turbine Blades

Available Forms

Sheet ( Max dimensions 2000mm x 1000mm, thickness ranges from 0.7mm to 100mm )

Cylinders.
( 200mm dia x 2000mm length )

Angles and Channels in various profiles and thicknesses up to 2000mm long.

 

Resources

Daily Read

Copyright © 2010 Lowden Limited | All Rights Reserved

© This is the web site of Lowden Ltd on the Internet. All copyrights and other intellectual property rights in the design and contents of this web site are reserved to Lowden Ltd. You may use it only as Lowden Ltd expressly permits you to. Any copying of the design or contents, or other unauthorized use, such as downloading and printing out any web pages, will infringe the rights of Lowden Ltd under international treaty and English law. Lowden Ltd is not responsible for the content of external Internet sites.